If you're not leveraging any QoS (and from the looks of your "show int" it doesn't look like it), then you could add "buffer-sharing-full" in the global config. That will release the buffers that are reserved for queues 1-7 and make them available to queue0, which is where all of your traffic currently is today.
If you are leveraging QoS, or plan on doing so in the near-term, then you'll probably need to be a little more selective about reallocating your buffers using specific "qd" commands instead. Jared Valentine [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Frederic Jaeckel Sent: Thursday, January 13, 2011 9:18 AM To: foundry-nsp Subject: [f-nsp] egress queue drops Hej, I'm having a few FCX switches which display egress drops in the interface statistics. I'm curious how I can fix that and if I can fix that. The mentioned thing happens on every port of the switch and at most on the uplink ports. I set the symmetric flow control like that: symmetric-flow-control set 1 buffers 320 and the error still occurs. Maybe someone has a hunch or knows the problem? Would be nice if I could fix that. > #show int e 1/1/1 > GigabitEthernet1/1/1 is up, line protocol is up > Hardware is GigabitEthernet, address is 0024.3877.9c40 (bia 0024.3877.9c40) > Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx > Configured mdi mode AUTO, actual none > Member of 5 L2 VLANs, port is tagged, port state is FORWARDING > BPDU guard is Disabled, ROOT protect is Disabled > Link Error Dampening is Disabled > STP configured to ON, priority is level0, mac-learning is enabled > Flow Control is config enabled, oper enabled, negotiation disabled > mirror disabled, monitor disabled > Not member of any active trunks > Not member of any configured trunks > No port name > Inter-Packet Gap (IPG) is 96 bit times > IP MTU 1500 bytes > 300 second input rate: 136526024 bits/sec, 41720 packets/sec, 14.31% utilization > 300 second output rate: 355122840 bits/sec, 55045 packets/sec, 36.38% utilization > 7038712 packets input, 2873484976 bytes, 0 no buffer > Received 8 broadcasts, 1101 multicasts, 7037603 unicasts > 0 input errors, 0 CRC, 0 frame, 0 ignored > 0 runts, 0 giants > 9327790 packets output, 7548747686 bytes, 0 underruns > Transmitted 16 broadcasts, 7630 multicasts, 9320144 unicasts > 0 output errors, 0 collisions > Relay Agent Information option: Disabled > > Egress queues: > Queue counters Queued packets Dropped Packets > 0 9327946 1356 > 1 0 0 > 2 0 0 > 3 0 0 > 4 0 0 > 5 0 0 > 6 0 0 > 7 0 0 best regards, Frederic Jaeckel _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
