Hi, As far as I know you must use ACL baser RL for this - I mean something like this (4.1): interface ethernet 1/10 rate-limit output access-group 400 policy-map test rate-limit input access-group 400 policy-map test
policy-map test cir 10000000 cbs 25000 access-list 400 permit any any 100 etype any Unfortunately CES is not just smaller MX - it was seriously hurt by PBB/PBT implementation :-( Regards Tomek W dniu 2011-02-18 15:13, Remco Bressers pisze: > Hi, > > On our MLX and XMR's, we do rate-limiting per VLAN with queueing, like: > > policy-map shape-2Mb > cir 1995280 cbs 500000 > ! > interface e1/1 > rate-limit input vlan-id 100 policy-map shape-2Mb > rate-limit output vlan-id 100 policy-map shape-2Mb > > Is the same thing possible on a Brocade CER2000? As far as i know, > it's just a small MLX :). > > Regards, > > Remco Bressers > Signet B.V. > AS28878 > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
