On 03/09/2011 04:40 AM, Raoul Bhatia [IPAX] wrote:
hi,
almost all of my EdgeIron 4802CF show:
POST result:
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test........... FAIL
------------------- DONE --------------------
even as it shows a failed status, the switch seems to work propoerly.
can anyone please explain the meaning of the "Switch Internal Loopback
Test"?
thanks,
raoul
This is a very common error with this switch, normally a cold reboot
will fix the issue but I've yet to see it cause any real effect on the
traffic passing through the device. I have however seen it disrupt ip
based management to the device (i.e. telnet, snmp, etc). As for a
detailed meaning of what that test is doing, I can't help you there.
Regards,
Chris Marlatt
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
