Hi, It seems the Brocade products we use (FastIron, BigIron and NetIron) are happy to accept and use third party optics (E1MG-*, XFP-*), but some of the boxes, particulary FastIrons, are a bit picky on reporting DOM. Workaround seems to reprogram the EEPROM, so it lies to the switch about its make and model.
Only troubles I've seen is with E1MG-TX (RJ45 copper) "optics", but it could be that we have seen a bad batch. Best regards, Jorik Jonker -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Pavel Lunin Sent: donderdag 14 april 2011 19:42 To: [email protected] Subject: [f-nsp] 3rd party optics Hi all, Can anyone confirm/disprove, that any Brocade product is know to have 'religious' restriction for 3rd party optics. Both SPF and XFP/SPF+. I've been told it (non-native transceivers) is accepted, but there are some rumors... -- Regards, Pavel _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp This email is from Equinix Europe Limited or one of its associated/subsidiary companies. This email, and any files transmitted with it, contains information which is confidential, may be legally privileged and is solely for the use of the intended recipient. If you have received this email in error, please notify the sender and delete this email immediately. Equinix Europe Limited. Registered Office: Quadrant House, 4 Thomas More Square, London E1W 1YW. Registered in England and Wales, No. 6293383. _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
