Hi Frank, My XMR's are running 5.1.0bT163 and my CES's are running 5.0.0T183
Unfortunately I can't provide access to the FCX's but I may try have a look in this further sometime and see what I can get from them in turns of environment monitoring. Regards, Neil > -----Original Message----- > From: Frank Bulk - iName.com [mailto:[email protected]] > Sent: 16 May 2011 18:15 > To: Neil Robst; [email protected] > Subject: RE: [f-nsp] NAGIOS plugin for Brocade MLXe > > I don't have any FCX switches to test again -- if anyone does and is willing > to > provide SNMP RO access, I'd be willing to poke around. > > Can you share what software releases you have on the XMR and CES? > > Frank > > -----Original Message----- > From: Neil Robst [mailto:[email protected]] > Sent: Monday, May 16, 2011 10:13 AM > To: [email protected]; [email protected] > Subject: RE: [f-nsp] NAGIOS plugin for Brocade MLXe > > Hi Frank, > > Just to report that this seems to work well against my XMR's and CES devices, > but not so good against the FCX switches. > > Huge thanks for it - great work! > > Cheers, > Neil > > > -----Original Message----- > > From: [email protected] [mailto:foundry-nsp- > > [email protected]] On Behalf Of Frank Bulk > > Sent: 10 May 2011 06:57 > > To: [email protected] > > Subject: [f-nsp] NAGIOS plugin for Brocade MLXe > > > > I enhanced an existing NAGIOS check_snmp_environment plugin to check > > power supply, fan, and temperature of the Brocade MLXe. It may work > > for the MLX > > and XMR - I don't know. It automatically scales to the number of power > > supplies, fans, and blades (each blade has a different number of > > temperature sensors). > > > > Here's some sample output: > > > ========================================================== > > == > > ps 1: OK: ps 2: OK: > > Back Fan A (1): OK; Back Fan A (2): OK; Back Fan B (7): OK; Back Fan B > (8): OK; > > Back Fan C (13): OK; Back Fan C (14): OK; Back Fan D (19): OK; Back > > Fan D > (20): > > OK; Line module 1, sensor 1 temperature of 31°C: OK; Line module 1, > > sensor > > 2 temperature of 35.5°C: OK; Line module 1, sensor 4 temperature of 33°C: > > OK; Line module 1, sensor 5 temperature of 36°C: OK; Active management > > module temperature of 25.5°C: OK; Active management module > temperature > > of 38.5°C: OK; Switch Fabric module 0, sensor 1 temperature of > > 25.5°C: OK; Switch Fabric module 1, sensor 1 temperature of 37.5°C: > > OK; > all > > OK > > > ========================================================== > > == > > > > I shared the improvements with the main author only today, but feel > > free > to > > contact me if you want a copy. > > > > Frank > > > > > > _______________________________________________ > > foundry-nsp mailing list > > [email protected] > > http://puck.nether.net/mailman/listinfo/foundry-nsp > > This e-mail and any attachments are confidential and intended solely for the > addressee and may also be privileged or exempt from disclosure under > applicable law. If you are not the addressee, or have received this e-mail in > error, please notify the sender immediately, delete it from your system and > do not copy, disclose or otherwise act upon any part of this e-mail or its > attachments. > > Internet communications are not guaranteed to be secure or virus-free. > ioko365 Limited does not accept responsibility for any loss arising from > unauthorised access to, or interference with, any Internet communications > by any third party, or from the transmission of any viruses. > This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments. Internet communications are not guaranteed to be secure or virus-free. ioko365 Limited does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
