That command just drops you into LSP configuration. It doesn't have any impact on the VLL.
It's the same as if you had typed router mpls ; lsp ? Cheers. Mitchell ----- Original Message ----- From: Matthew Walster [mailto:[email protected]] To: [email protected] Sent: Thu, 16 Jun 2011 01:07:31 +1000 Subject: Re: [f-nsp] TE for the same VLL peers > 2011/3/31 Romain DEGEZ <[email protected]>: > > Quoting the documentation: > > > > Syntax: vll <vll-name> <vll-vc-id> [cos <cos value>] [raw-mode] > > The <vll-vc-id> corresponds to the user-configurable ID defined in draft > > ietf-pwe3-control-protocol-14.txt. > > With a bit of discovery with a few colleagues, I've found out there's > an undocumented option in the "conf t ; router mpls ; vll xyz 1000" > tree; that is, it's not in the help menu. Try typing "lsp ?" - I > wonder if anyone's using it in the field and can report if it works > correctly? > > M > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
