On a FESX424, the command would be:
tag-type 9100 ethe 13 to 24
Did you try that on the FWS?
At 08:41 AM 03/05/2012, Tamas Csillag wrote:
On 05/03/2012 02:34 PM, Eric Helm wrote:
On 5/2/2012 4:16 PM, Tamas Csillag wrote:
Dear All,
After exploring the possibilities of my FWS24 (kinda old, I know), I
found these options:
aggregated-vlan support for larger Ethernet frame up to
1530 bytes
tag-type Customize value used to indicate tagged VLAN port
Does this mean that this baby supports Q-in-Q?
Also, does anybody have an older FastIron config guide? Most stuff I can
dig up is for the FWS624 and other newer switches.
You can do it with the tag-type command. A caveat on the FastIron
platform is that command applies to a port region, not just a single
port. Port regions on those are 1-12 and 13-24 I believe.
/Eric
That's what I gathered from the Fastiron config guides too, but the
command does not take an interface as an argument, just the integer, like:
tag-type <number> <cr>
So I assume it's for the whole system, then?
Tamas
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
---
Clayton Zekelman
Managed Network Systems Inc. (MNSi)
3363 Tecumseh Rd. E
Windsor, Ontario
N8W 1H4
tel. 519-985-8410
fax. 519-985-8409
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
