|
Shameless bump. When I try to trunk the lacp ports, I get an error: trunk ethernet 3/3 to 3/4 error - trunk ports contain LACP-enabled ports. Here's the relevant part of the config: interface ethernet 3/3 mtu 9000 link-aggregate configure key 10000 link-aggregate active ! interface ethernet 3/4 link-aggregate configure key 10000 link-aggregate active ! show link-ag: System ID: 000c.dba5.e840 Long timeout: 90, default: 90 Short timeout: 3, default: 3 Port [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope] 3/3 1 1 10000 Yes L Agg Syn Col Dis No No Ope 3/4 1 1 10000 Yes L Agg Syn Col Dis No No Ope show trunk: Configured trunks: Trunk ID: 66 Type: Switch Ports_Configured: 2 Primary Port Monitored: Jointly Ports 3/3 3/4 Port Names none none Port_Status enable enable Monitor off off Mirror Port N/A N/A Monitor Dir N/A N/A Operational trunks: Trunk ID: 66 Type: Switch Duplex: Full Speed: 1G Tag: No Priority: level0 Active Ports: 2 Ports 3/3 3/4 Link_Status active active LACP_Status ready ready Load Sharing Mac Address 6 5 IP 0 0 IPX 0 0 Apple Talk 0 0 Multicast 0 0 On 04/12/2012 07:16 PM, Edward Rosinzonsky wrote: Hi, |
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
