On Fri, Jul 13, 2012 at 07:47:57PM +0300, Alexander Shikoff wrote: > Hello! > > I'm trying to create port-based VLAN on MLXe box. Current configuration is > below: > > vlan 777 name PUBLIC > tagged ethe 1/2 > router-interface ve 1 > ! > ! > no route-only > ! > interface ethernet 1/2 > enable > ! > interface ve 1 > ip address 193.25.181.66/23 > > > Interface eth1/2 is up, but I cannot see any MAC address in this VLAN. > But when I'm trying to ping 193.25.181.66 from outside of MLXe box, > I see ARP entry with MAC address of MLXe. > > What I missed?
Thanks to all who replied off-list :) It was a problem with broken FPGA image on interface module. -- MINO-RIPE _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
