* [email protected] (Greg) [Mon 20 Aug 2012, 19:27 CEST]:
I am trying to figure out the hardware port-regions on both Brocade
MLX4 and Brocade NetIron CER/CES. The purpose is to set multiple
Q-in-Q point-to-point Layer-2 connectivity toward different
locations, but also use BGP capabilities.
On NI-MLX-1Gx20-SFP will tag-type affect all ports from 1 to 24?
On CER2024F and CES2024F, will the tag-type also affect all these
ports? I have not checked if its tag-type statement or another one.
"The Brocade device supports per port tag-type configuration." from
the CES/CER/MLX/XMR/MLXe 5.2.0b configuration guide. I know this
holds true for 4x10G and 8x10G modules in MLX.
The only limitation that I see at a quick glance on the manual is when
doing Provider (Backbone) Bridging you cannot specify different
tag-types for BVLAN, CVLAN & SVLAN on MLX while you can on CER
-- Niels.
--
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
