Hi, I am trying to do LACP over Q-in-Q.
Without LACP Q-in-Q works fine, though when I do the LACP then link won't come up. I am using NetIron CES routers on the ISP side and FWS switches on the customer side. My configuration on customer side (all switches) looks as follow: lag "LAG" dynamic id 10 > ports eth 1/4 to 1/6 > primary-port 1/4 > deploy vlan 200 > tagged eth 1/1 > untagged eth 1/4 to 1/6 My configuration on ISP side looks as follow: spanning-tree > tag-value tag2 9100 > tag-type tag1 ethe 1/1 > tag-type tag2 ethe 1/2 > tag-type tag2 ethe 1/3 > vlan 1 name DEFAULT-VLAN > vlan 333 name MGT > untagged ethe 1/24 > tagged ethe 1/1 > router-interface ve 1 > spanning-tree priority 201 > vlan 1013 name LINK-1 > untagged ethe 1/2 > tagged ethe 1/1 > vlan 1014 name LINK-2 > untagged ethe 1/3 > tagged ethe 1/1 > default-max-frame-size 9216 > aaa authentication login default local > enable super-user-password ..... > username ncradmin password ..... > hostname PE-01 > interface ethernet 1/1 > port-name UPLINK > enable > interface ethernet 1/2 > port-name LINK-1 > enable > interface ethernet 1/3 > port-name LINK-2 > enable > interface ethernet 1/24 > enable > interface ve 1 > ip address 192.168.50.10/24 > Any clue why would QinQ works without LACP but fail with LACP enabled? Cheers, Greg
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
