Looks like a hardware problem related to the traffic manager handling those ports. I suggest contacting Brocade support.
On Tue, Sep 11, 2012 at 12:18 PM, Dave Peters - Terabit Systems <[email protected]> wrote: > Hey all— > > > > I’ve got a NI-MLX-10Gx8-M running on an MLXe-16, software version 5.300a. > The top four ports (3/1 to 3/4) work just fine, but when I plug a cable > into port 5 or 6, the card abruptly power cycles, and continues to do so > until I unplug that port. > > > > In the logs (below) I’m getting a “TM Health Monitoring” error. > > > > Has anyone experienced anything like this? Any advice? > > > > As always, much appreciated. > > > > --Dave Peters > > > > Dynamic Log Buffer (50 lines): > > Sep 11 18:21:12:N:System: Module 5 powered on > > Sep 11 18:21:11:N:System: Module 5 powered off > > Sep 11 18:21:11:I:System: Interface ethernet 5/6, state down - unspecified > > Sep 11 18:21:11:N:System: Module down in slot 5, reason > CARD_DOWN_REASON_POWERED > > _OFF_BY_USER. Error Code 0 > > Sep 11 18:21:11:D:System: TM Health Monitoring detects an issue in slot 5 > ppcr 1 > > Reg Offset 00000000 Value 00000004 > > Sep 11 18:21:11:D:System: Module reset in slot 5, triggered by TM Health > Monitor > > ing > > Sep 11 18:21:06:I:System: Interface ethernet 5/6, state up > > Sep 11 18:21:06:I:System: Interface ethernet 5/8, state down - link down > > Sep 11 18:21:06:W:SYSTEM: Optic is not factory qualified (port 5/8). > > Type : 10GE SR 300m SFP+ > > Vendor: FINISAR CORP. , Version: A > > Part# : FTLX8571D3BCL , Serial#: UBK00GS > > Sep 11 18:21:05:I:System: Interface ethernet 5/8, state up > > Sep 11 18:20:26:I:Security: running-config was changed by operator from > console > > Sep 11 18:20:24:I:PORT: 5/8 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/7 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/6 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/5 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/4 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/3 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/2 enabled by operator from console session. > > Sep 11 18:20:24:I:PORT: 5/1 enabled by operator from console session. > > Sep 11 18:19:35:N:System: Module up in slot 5 > > Sep 11 18:19:14:N:System: Module up in slot 3 > > Sep 11 18:19:03:D:TM logging started by an event trigger > > Sep 11 18:18:33:I:System: Warm start > > Sep 11 18:18:33:N:System: IfIndex assignment was changed > > Sep 11 18:18:33:A:System: AC Power Supply 4 , 4th from left (top row), > Installed > > (OK) > > Sep 11 18:18:32:A:System: AC Power Supply 3 , 3rd from left (top row), > Installed > > (OK) > > NetIron MLX-16 Router# _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
