Hello, I am trying to work out what happens if I hit the CAM hard limit and if my project is doable.
I am considering running 8 eBGP sessions with full-route on each (approx. 3'500'000 prefixes expected). As far as I could figure out, the CAM limit depends on the CAM profile. The XMR seems to support 1M IPv4 prefixes in ipv4 profile mode and 512K on MLX. These figures are according to “CAM partition profiles” of the MLX Configuration Manual. 1) What is BR-MLX-MR2-M considered to be and which limit would apply to that part? 2) What happens when the limit is reached? 3) If it simply can't work what am I supposed to do to run 3.5M v4 prefixes? I know the question has been asked previously, but I didn't find any mention of the above part, neither did I find the "consequences" of hiting the documentation limit. Any hint most welcome. --- Alex
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
