Hello,
One of my networks uses a Serveriron XL/G fiber L4 Gigibit switch. After a
power loss, the boot image on the switch became corrupted and I was only able
to boot from the backup image. Unfortunately the backup boot image is quite old
and some commands, such as 'tcp l4-check-only' don't seem to exist in this
version (07.1.08T42). Does anyone know what the current/last software version
for this, somewhat aged, switch is? Does Foundry/Brocade still supports the
older ServerIron XL/G switches in terms of providing software images for them?
Please let me know....
Thanks
JB
Current software version
#sho ver
SW: Version 07.1.08T42 Copyright (c) 1996-1999 Foundry Networks, Inc.
Compiled on Dec 18 2000 at 18:15:31 labeled as BSI07108
HW: Stackable SLB, SYSIF version 10
==========================================================================
T8F Fiber
2048 KB BRAM, SMC version 1, ICBM version 21
128 KB PRAM(128K+0K) and 2048*4 CAM entries for DMA 0, version 0209
128 KB PRAM(128K+0K) and shared CAM entries for DMA 1, version 0209
128 KB PRAM(128K+0K) and 2048*4 CAM entries for DMA 2, version 0209
128 KB PRAM(128K+0K) and shared CAM entries for DMA 3, version 0209
==========================================================================
400 MHz Power PC processor 740 (verion 8/8202) 66 MHz bus
128 KB boot flash memory
4096 KB code flash memory
512 KB SRAM
32 MB DRAM
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
