Hi, Dear Colleagues, would be anyone so kind to share best practice of Broadcast Storm Control for switched ports on MLXe platform?
At current moment I'm using rate-limiting based on MAC access-lists, for example: conf t access-list 400 permit any ffff.ffff.ffff ffff.ffff.ffff any etype any ! int eth 2/2 no route-only rate-limit input access-group 400 122160 16000 ! But with this configuration I cannot apply MAC access group: # mac access-group CUST1 in Error: L2 based ACL based rate limiting is configured on the port. Thanks in advance! -- MINO-RIPE _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
