+1 here, running a single VDX6720 in L3 mode with OSPF for internal
routing, static routes for internet connectivity, and VRRP-e
pre-configured in case I want to add a second VDX to the fabric at a
later point. It has been stable on NOS3.0.1a for a few months now.
You are best off running L3 on a VDX8770 or VDX6740; the former has been
GA for a while now, but the latter is still under development. These two
models were designed with L3 functionality in mind while the VDX6720 was
originally designed for L2 with its routing functionality to be added a
few years later. If you were looking at a VDX6720 now, I'd recommend
waiting a few months for the VDX6740 release and buy that instead.
Best regards,
Martijn Schmidt
Network Engineer
Contact:
E-mail Personal: [email protected]
E-mail Support: [email protected]
E-mail NOC: [email protected]
Website: http://www.i3d.net
Office:
Interactive 3D B.V.
Meent 93b
3011 JG Rotterdam
The Netherlands
Visit www.smartdc.net -- SmartDC is our in-house 36,000 sq. ft. datacenter in
Rotterdam, The Netherlands. High density hosting -- multiple fiber carriers
in-house -- Level3 PoP.
Interactive 3D (i3D.net) is a company registered in The Netherlands at Meent
93b, Rotterdam. Registration #: 14074337 - VAT # NL 8202.63.886.B01.
Interactive 3D (i3D.net) is CDSA certified on content protection and security.
We are ranked in the Deloitte Technology Fast 50 as one of the fastest growing
technology companies.
On 08/27/2013 05:26 PM, Matt Kassawara wrote:
I'm running a cluster of VDX 6720s with OSPF and static routes... no
problems so far.
On Tue, Aug 27, 2013 at 8:01 AM, Ryan Harden <[email protected]
<mailto:[email protected]>> wrote:
What were the problems you had with MLX/RX? I've generally had
good luck with MLX and MLXe and Layer3.
/Ryan
Ryan Harden
Senior Network Engineer
University of Chicago - AS160
P: 773-834-5441 <tel:773-834-5441>
On Aug 27, 2013, at 7:58 AM, John pp <[email protected]
<mailto:[email protected]>> wrote:
> I am considering the VDX 8770's and VDX 6710's, will be doing
full layer3 on them while utilizing VRRP..Anyone have a similar
setup? , if so please alert of me of any issues.
>
> I've had layer3 issues with the MLX and RX line which is why I'm
hesitant to spend any significant amount of money before I'm sure
its a concrete solution..
>
> Appreciate it
>
>
> _______________________________________________
> foundry-nsp mailing list
> [email protected] <mailto:[email protected]>
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected] <mailto:[email protected]>
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
