Hi Alexander, With 24x10, we have 3 TM for 24x10, so each for 8 groups. AFAIK, we can have only 6 ports at line-rate per TM. So only 6 ports can run at line-rate, regardless of which port. The left over 2 ports are recommended to be kept as spare.
Some setting that we can add to improve the forwarding rate * Change the chassis to turbo mode (not applicable if the chassis contains generation-1 line-card line 4x10). system-init fabric-data-mode force-turbo * Increase the TM credit size. This was originally recommended from B-TAC to run 2x100G line-card at line-rate, and since the 24x10 belong to the same LP generation, this could help bring it up to line-rate. system-init tm-credit-size credit_1024b Both commands require chassis reloading On 14/04/14 13:04, Alexander Shikoff wrote: > Hi All, > > some days ago we installed BR-MLX-10Gx24-DM 24-port 10GbE Module in MLXe-16 > router. Now first 8 ports are connected to customers. And from that time > we're observing strange traffic limit on output: output rate does not grow > more than 2.2 Gbit/s. > I'm aware of over-subscription on this module, but total output rate from > first 8 ports is much lower than 60 Gbit/s. > > What can cause such strange limit? > > Thanks in advance! > -- Best Regards, Eric Nghia Nguyen-Duy _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
