Yea, 'spanning-tree 802-1w admin-edge-port' was the answer, works great.
Already had 802.1w configured on each vlan so there was no funny
business.
Thanks for the clue everyone.
~Randy
On 06/16/2014 7:52 pm, Eldon Koyle wrote:
Also, I think the default is not to use rstp/802.1w, so you will need
to
configure that as well. I'm lazy, so I just run 'spanning-tree single
802-1w'. If you have a more complicated VLAN setup, you may need to do
something different. Keep in mind that normal spanning tree and 802-1w
use different show commands. 'show spanning-tree' will give you normal
stp, 'show 802-1w' will give your rstp/802.1w.
SSH@icx6450#show span
Spanning-tree is not configured on port-vlan 4094
L2 VLAN 1 22 to 23 140 999 1041 3000 4000 to 4001 are members of
single spanning tree.
SSH@icx6450#show 802-1w
--- VLAN 4094 [ STP Instance owned by VLAN 4094 ]
---------------------------
Bridge IEEE 802.1W Parameters:
Bridge Bridge Bridge Bridge Force tx
Identifier MaxAge Hello FwdDly Version Hold
hex sec sec sec cnt
607c748ef8000000 20 2 15 Default 3
RootBridge RootPath DesignatedBri- Root Max Fwd Hel
Identifier Cost dge Identifier Port Age Dly lo
hex hex sec sec sec
607c748ef8000000 0 607c748ef8000000 Root 20 15 2
Port IEEE 802.1W Parameters:
<--- Config Params --><-------------- Current state
----------------->
Port Pri PortPath P2P Edge Role State Designa-
Designated
Num Cost Mac Port ted cost bridge
1/1/1 128 20000 F F DESIGNATED FORWARDING 0
607c748ef8000000
1/1/2 128 20000 F F DESIGNATED FORWARDING 0
607c748ef8000000
1/1/3 128 20000 F F DESIGNATED FORWARDING 0
607c748ef8000000
1/1/4 128 20000 F F DESIGNATED FORWARDING 0
607c748ef8000000
<and so on>
--
Eldon Koyle
Information Technology
Utah State University
--
Mathematics is the only science where one never knows what
one is talking about nor whether what is said is true.
-- Russell
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
