I noticed it on the 8010. I moved to 8020aa and disabled loop detection on our peer switches, at which point I promptly forgot about it and went on with life ;).
We are currently running 8030b, but I haven't had a chance to check to see if it is fixed (I don't have any of them for our lab environment, and I don't want to cause an outage). -- Eldon On Fri, Dec 4, 2015 at 4:05 PM, Frank Bulk <[email protected]> wrote: > Eldon, > > Our Brocade reseller is aware of the issue you're describing and says it's > being worked on. He's asking what code release you're on and if it's 10G or > 40G specific. > > Frank > > -----Original Message----- > From: foundry-nsp [mailto:[email protected]] On Behalf Of > Eldon Koyle > Sent: Thursday, December 03, 2015 3:54 PM > To: Michael Gehrmann <[email protected]> > Cc: [email protected] > Subject: Re: [f-nsp] ICX7750 Unstable Control Plane > > I have seen other strange things on the ICX7750, the most concerning > of which is a temporary forwarding loop on an MCT LAG during every > boot. > > The code still seems a bit immature... > > On Sun, Nov 29, 2015 at 4:20 PM, Michael Gehrmann > <[email protected]> wrote: >> I've experienced two weird phenomena recently on ICX7750's on 08030d. >> >> 1. Configuring VRRP-E on shutdown VE and losing SSH session to unrelated > VE >> interface >> 2. Disabling 20+ interfaces at once causing VRRP-E to flap and BGP to flap >> >> We believe #2 was due to high CPU. Anyone experienced anything similar? >> >> -- >> Mike >> >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
