I thought 5.6 was the last supported release for the 1st gen hardware (-MR management module, 10Gx4 cards, etc.), although I'm not seeing anything about the MR module so maybe it is still supported.
From 5.7 release notes: Note: Gen 1 Module SKUs are not supported beyond R05.6:00 • NI-MLX-1Gx20-GC • NI-MLX-1Gx20-SFP • NI-XMR-1Gx20-GC • NI-XMR-1Gx20-SFP • NI-MLX-10Gx2 • NI-MLX-10Gx4 I don't know if that is part of your problem, but is there a feature you needed that wasn't available in 05600g? If not, you might consider downgrading to see if there is a difference there. It is possible that there is a memory leak somewhere in 5.7 or something like that. The MR modules only had 1 GB of ram, the MR2 has 4 GB. You could upgrade to a single MR2 management module in this device (this is what they use in the MLXe chassis, if you are sticking with brocade for your replacement). -- Eldon On Tue, Mar 8, 2016 at 10:17 AM, Chris Hellkvist <[email protected]> wrote: > Sure: > > SSH@CRBR13-F> sh cam-partition brief > > CAM partitioning profile: multi-service-2 > > Slot 1 XPP20SP 0: > # of CAM device = 3 > Total CAM Size = 524288 entries (36Mbits) > > IP: Raw Size 458752, User Size 458752(0 reserved) > Subpartition 0: Raw Size 2048, User Size 2048, (0 reserved) > Subpartition 1: Raw Size 411289, User Size 411289, (0 reserved) > Subpartition 2: Raw Size 37892, User Size 37892, (0 reserved) > Subpartition 3: Raw Size 5741, User Size 5741, (0 reserved) > Subpartition 4: Raw Size 1112, User Size 1112, (0 reserved) > > IPv6: Raw Size 32768, User Size 16384(0 reserved) > Subpartition 0: Raw Size 2048, User Size 1024, (0 reserved) > Subpartition 1: Raw Size 27204, User Size 13602, (0 reserved) > Subpartition 2: Raw Size 2332, User Size 1166, (0 reserved) > Subpartition 3: Raw Size 512, User Size 256, (0 reserved) > Subpartition 4: Raw Size 384, User Size 192, (0 reserved) > > SSH@CRBR13-F>sh default values > sys log buffers:50 mac age time:300 sec telnet sessions:5 > > ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops > ip addr per intf:24 > > when multicast enabled : > igmp group memb.: 260 sec igmp query: 125 sec > > when ospf enabled : > ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec > ospf transit delay:1 sec > > when bgp enabled : > bgp local pref.:100 bgp keep alive:60 sec bgp hold:180 sec > bgp metric:10 bgp local as:1 bgp cluster id:0 > bgp ext. distance:20 bgp int. distance:200 bgp local distance:200 > > when IS-IS enabled : > isis hello interval:10 sec isis hello multiplier:3 > isis port metric:10 isis priority:64 > isis csnp-interval:10 sec isis default-metric:10 > isis distance:115 isis lsp-gen-interval:10 sec > isis lsp-interval:33 msec isis lsp-refresh-interval:900 sec > isis max-lsp-lifetime:1200 sec isis maximum-paths:4 > isis retransmit-interval:5 sec isis spf-interval:5 sec > > filter change update delay:10 sec > > System Parameters Default Maximum Current Actual > Bootup Revertible > mac 32768 1048576 32768 32768 > 32768 Yes > vlan 512 4095 1024 1024 > 1024 No > spanning-tree 32 128 32 32 > 32 No > rstp 32 128 32 32 > 32 No > ip-arp 8192 65536 40000 40000 > 40000 No > ip-cache 102400 524288 440000 440000 > 440000 Yes > ip-route 102400 524288 440000 440000 > 440000 Yes > ip-subnet-port 24 128 24 24 > 24 No > virtual-interface 255 4095 800 800 > 800 No > vpls-mac 2048 262144 2048 2048 > 2048 Yes > vpls-num 512 4096 512 512 > 512 No > session-limit 8192 40960 8192 8192 > 8192 Yes > ip-filter-sys 4096 102400 4096 4096 > 4096 No > mgmt-port-acl-size 20 100 20 20 > 20 No > l2-acl-table-entries 64 256 64 64 > 64 No > ipv6-cache 32768 114688 16000 16000 > 16000 Yes > ipv6-route 32768 114688 16000 16000 > 16000 Yes > ip-vrf-route 5120 262144 5120 5120 > 5120 Yes > receive-cam 1024 16384 1024 1024 > 1024 No > ip-tunnels 256 8192 256 256 > 256 No > lsp-out-acl-cam 0 16384 0 0 0 > No > trunk-num 128 256 128 128 > 128 No > config-file-size 8388608 32505856 8388608 8388608 > 8388608 No > ifl-cam 8192 81920 8192 8192 > 8192 No > ip-source-guard-cam 0 131072 0 0 0 > No > ipv4-mcast-cam 4096 32768 4096 4096 > 4096 No > ipv6-mcast-cam 1024 8192 1024 1024 > 1024 No > mcast-vpls-cam 0 2048 0 0 0 > Yes > ip-vrf 400 400 400 400 > 400 Yes > ipv6-vrf-route 128 16384 128 128 > 128 Yes > subnet-broadcast-acl-cam 0 4096 0 0 0 > No > trunk-num-100g 8 64 8 8 8 > No > openflow-flow-entries 0 65536 0 0 0 > Yes > openflow-pvlan-entries 0 2048 0 0 0 > Yes > openflow-unprotectedvlan 0 4096 0 0 0 > Yes > ipv6-receive-cam 0 8192 0 0 0 > No > ecmp-pram-block-size 32 32 32 32 > 32 Yes > tvf-lag-lb-fid-pool 0 2048 0 0 0 > Yes > tvf-lag-lb-fid-group 4 16 4 4 4 > Yes > openflow-group-select-bu 8 64 8 8 8 > Yes > > Openflow Slot Parameters slot Default > Maximum Actual Revertible > np-openflow-flow-entries : layer2or3 1 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 2 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 3 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 4 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 5 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 6 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 7 0 > 32768 0 No > np-openflow-flow-entries : layer2or3 8 0 > 32768 0 No > > np-openflow-flow-entries : layer23ipv4 1 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 2 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 3 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 4 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 5 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 6 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 7 0 > 32768 0 No > np-openflow-flow-entries : layer23ipv4 8 0 > 32768 0 No > > 2016-03-08 18:00 GMT+01:00 Eldon Koyle <[email protected]>: >> Could you also provide the output of 'show default values'? >> >> You may need to change your cam-partition profile. >> >> -- >> Eldon >> >> On Tue, Mar 8, 2016 at 8:13 AM, Chris Hellkvist via foundry-nsp >> <[email protected]> wrote: >>> Dear all, >>> >>> recently we connected another upstream to a Brocade MLX box. >>> >>> We noticed that the MLX was not learning all routers from this BGP >>> peer both on the IPv4 and IPv6 session. Looking for the root cause we >>> found the following entries in the log of the box: >>> Mar 7 11:46:59:W:System: Low pool memory, Pool(2-Global) below 5%, >>> total memory(1073741824), available memory(53534720) on MP >>> Mar 7 11:46:58:W:System: Low physical memory, Pool(2-Global) below >>> 5%, total memory(1073741824), available memory(53235712) on MP >>> >>> I'm a bit worried because the system has not that many BGP sessions >>> active (around 8 while 4 peers send a full table that is reduces to >>> around 390k routes in the RIB/FIB using prefix lists). >>> >>> After removing the BGP peers the free memory went to arund 7%, however >>> prior to the configuration we have never had any warning regarding the >>> usual 10% threshold). >>> >>> Looking at the memory histogram i can see that most memory is consumed >>> by the following processes: >>> bgp 1221 106342047 >>> bgp_io 3925 473596101 >>> >>> Any idea how to reduce the memory footprint of bgp_io or to free up >>> more space by adjusting some system-max variables? Or any other >>> options than replacing the box with some new gear (luckily this will >>> happen end of 2016). >>> >>> Thanks, >>> Chris >>> >>> For the recordds, the modules we have in place and a sh ve of the system: >>> SSH@CRBR13-F#sh module >>> Module Status >>> Ports Starting MAC >>> M1 (left ):NI-MLX-MR Management Module Active >>> M2 (right):NI-MLX-MR Management Module Standby(Ready >>> State) >>> F1: NI-X-SF Switch Fabric Module Active >>> F2: NI-X-SF Switch Fabric Module Active >>> F3: NI-X-SF Switch Fabric Module Active >>> S1: NI-MLX-10Gx4 4-port 10GbE Module >>> CARD_STATE_UP 4 001b.ed17.d000 >>> S2: NI-MLX-10Gx4 4-port 10GbE Module >>> CARD_STATE_UP 4 001b.ed17.d030 >>> S3: NI-MLX-10Gx4 4-port 10GbE Module >>> CARD_STATE_UP 4 001b.ed17.d060 >>> S4: NI-MLX-10Gx4 4-port 10GbE Module >>> CARD_STATE_UP 4 001b.ed17.d090 >>> S5: NI-MLX-10Gx4 4-port 10GbE Module >>> CARD_STATE_UP 4 001b.ed17.d0c0 >>> >>> SSH@CRBR13-F#sh ve >>> System Mode: MLX >>> Chassis: NetIron 8-slot (Serial #: A60532F06T, Part #: 35549-000C) >>> NI-X-SF Switch Fabric Module 1 (Serial #: SA38070273, Part #: 35523-300C) >>> FE 1: Type fe200, Version 2 >>> FE 3: Type fe200, Version 2 >>> Switch Fabric Module 1 Up Time is 286 days 23 hours 8 minutes 55 seconds >>> NI-X-SF Switch Fabric Module 2 (Serial #: SA13070172, Part #: 35523-300C) >>> FE 1: Type fe200, Version 2 >>> FE 3: Type fe200, Version 2 >>> Switch Fabric Module 2 Up Time is 286 days 23 hours 8 minutes 55 seconds >>> NI-X-SF Switch Fabric Module 3 (Serial #: SA13080287, Part #: 35523-301A) >>> FE 1: Type fe200, Version 2 >>> FE 3: Type fe200, Version 2 >>> Switch Fabric Module 3 Up Time is 286 days 23 hours 8 minutes 55 seconds >>> ========================================================================== >>> SL M1: NI-MLX-MR Management Module Active (Serial #: S10526F06N, Part >>> #: 35524-103J): >>> Boot : Version 5.6.0T165 Copyright (c) 1996-2014 Brocade >>> Communications Systems, Inc. >>> Compiled on Sep 20 2013 at 16:42:38 labeled as xmprm05600 >>> (516258 bytes) from boot flash >>> Monitor : Version 5.7.0T165 Copyright (c) 1996-2014 Brocade >>> Communications Systems, Inc. >>> Compiled on May 5 2014 at 10:41:24 labeled as xmb05700 >>> (537647 bytes) from code flash >>> IronWare : Version 5.7.0cT163 Copyright (c) 1996-2014 Brocade >>> Communications Systems, Inc. >>> Compiled on Feb 25 2015 at 20:44:00 labeled as xmr05700c >>> (9651771 bytes) from Primary >>> Board ID : 00 MBRIDGE Revision : 37 >>> 916 MHz Power PC processor 7447A (version 8003/0101) 166 MHz bus >>> 512 KB Boot Flash (AM29LV040B), 32 MB Code Flash (MT28F128J3) >>> 1024 MB DRAM INSTALLED >>> 1024 MB DRAM ADDRESSABLE >>> Active Management uptime is 286 days 23 hours 8 minutes 55 seconds >>> _______________________________________________ >>> foundry-nsp mailing list >>> [email protected] >>> http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
