The control protocol priority mapping has not been publicly published for the ICX products. I'm not sure why that is.
However, the NetIron Traffic Management Guide does have a published control protocol mapping table which is somewhat similar to ICX but with the addition of MPLS control protocol priorities. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Wopat Sent: Friday, July 21, 2017 7:31 AM To: Robert Wiebusch <[email protected]> Cc: [email protected] Subject: Re: [f-nsp] ICX6650 / ICX7750 queue mapping On Thu, Jul 20, 2017 at 1:47 PM, Robert Wiebusch <[email protected]> wrote: > > Here are the FastIron/ICX control protocols and the queues they are mapped > to. These are not configurable. Only the ICX 6430 has 4 hardware queues, > all other ICX have 8 priority queues per port. > <snip> Hey thanks much, this is what I was looking for. Did I just miss these in some docs or just listed in some internal KB? _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
