Hello! I've run in strange issue on my MLXe-16: traffic on port which formerly had been in LACP LAG and was removed from it hits LP CPU.
I have a LAG of 12 ports: === LAG "asw1-gdr-temp" ID 44 (dynamic Deployed) === LAG Configuration: Ports: e 2/3 e 3/8 e 4/2 e 7/11 e 7/14 e 8/3 e 9/8 e 10/2 e 11/4 e 13/5 e 14/12 e 14/14 Port Count: 12 Primary Port: 2/3 Trunk Type: hash-based I removed port eth 14/14 from LAG and assigned it to another customer, and now the traffic on it is being forwarded by LP CPU: tel...@lsr1-gdr.ki#show cpu-utilization lp 16:51:20 GMT+02 Thu Apr 12 2018 SLOT #: LP CPU UTILIZATION in %: in 1 second: in 5 seconds: in 60 seconds: in 300 seconds: 1: 1 1 1 1 2: 1 1 1 1 3: 1 1 1 1 4: 1 1 1 1 5: 1 1 1 1 6: 1 1 1 1 7: 1 2 1 1 8: 1 1 1 1 9: 1 1 1 1 10: 1 1 1 1 11: 1 1 1 1 12: 2 3 2 2 13: 1 1 1 1 14: 21 22 17 16 15: 1 1 1 1 16: 1 1 1 1 LACP LAG contains ports on mix of BR-MLX-10Gx20 and NI-MLX-10Gx8-D cards. Port 14/14 is on BR-MLX-10Gx20 card. A box runs IronWare ver. 5.9.00be. Did anyone run into the same issue? Is there a way to fix that without un-deploying LACP LAG? Thanks in advance! -- MINO-RIPE _______________________________________________ foundry-nsp mailing list foundry-nsp@puck.nether.net http://puck.nether.net/mailman/listinfo/foundry-nsp