Hello,
do somebody know the reason for these log entries, that start filling up
for a few days now? Platform is CES 2048CX, with 2x10G module on e2/1,
e2/2:
Regards Jörg
Mar 27 13:15:36:A:NP egress buffer has 10 error events, exceeding
configured threshold for interfaces 2/1 to 2/2.
Mar 27 13:05:36:A:NP egress buffer has 46 error events, exceeding
configured threshold for interfaces 2/1 to 2/2.
Mar 27 12:55:36:A:NP egress buffer has 11 error events, exceeding
configured threshold for interfaces 2/1 to 2/2.
Mar 27 12:45:36:A:NP egress buffer has 26 error events, exceeding
configured threshold for interfaces 2/1 to 2/2.
Mar 27 12:35:36:A:NP egress buffer has 14 error events, exceeding
configured threshold for interfaces 2/1 to 2/2.
Mar 27 12:25:36:A:NP egress buffer has 41 error events, exceeding
configured threshold for interfaces 2/1 to 2/2.
…
…
…
show interfaces ethernet 2/1
10GigabitEthernet2/1 is up, line protocol is up
Port state change time: Dec 28 15:25:46 (88 days 22:50:25 ago)
Hardware is 10GigabitEthernet, address is xxxx
Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual
fdx
300 second input rate: 630946 bits/sec, 319 packets/sec, 0.01%
utilization
300 second output rate: 48485160 bits/sec, 4899 packets/sec, 0.49%
utilization
2526250453 packets input, 632357591113 bytes, 0 no buffer
Received 6405 broadcasts, 1686963 multicasts, 2524557085 unicasts
0 input errors, 0 CRC, 0 frame, 0 ignored
0 runts, 0 giants
NP received 0 packets, Sent to TM 1 packets
NP Ingress dropped 2 packets
29041810769 packets output, 34689270582573 bytes, 0 underruns
Transmitted 1 broadcasts, 0 multicasts, 29041810768 unicasts
2657733 output errors, 0 collisions
NP transmitted 3 packets, Received from TM 4 packets
show interfaces ethernet 2/2
10GigabitEthernet2/2 is disabled, line protocol is down
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
