That may have actually done the trick. We aren't using any snmp tools on this box, but I added no snmp-server to the config and that brought cpu back down to 1%. I'll keep watching and see where it lands.
If there are any other thoughts, feel free to send them over. I appreciate any input. -----Original Message----- From: Jörg Kost <[email protected]> Sent: Wednesday, April 3, 2019 1:12 PM To: Derek Maxwell <[email protected]> Cc: foundry-nsp <[email protected]> Subject: Re: [f-nsp] FCX High CPU Diagnostics Can you eliminate any SNMP tool, that might spin the CPU around? On 3 Apr 2019, at 21:49, Derek Maxwell wrote: > Output of dm cpu: > > idle pid 0 id 536918812 cpu 0 usage 0 > main pid 1 id 536918812 cpu 0 usage 0 > flash pid 0 id 536918812 cpu 0 usage 0 > arrays at 2238d894 and 2238dd6c > from entry 78 to entry 35 > loop cnt: 3395 3626 -> 231 > read cnt: 57670 61592 -> 3922 > loop rate = 231/430 = 0 > rcode = 100 - (100*0/2550) = 100 > 99/100 busy, from 43 sec ago > > sho ip bgp sum does not show any FIB programming > > We have fewer than 10 routes in so we're definitely not exceeding any > limits. > > We have icmp redirects disabled > > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
