What does a show media look like? A looped on itself? B the wrong port?
> -----Original Message----- > From: foundry-nsp [mailto:[email protected]] On > Behalf Of Jörg Kost > Sent: Tuesday, 8 October 2019 7:07 PM > To: foundry-nsp <[email protected]> > Subject: [f-nsp] Showing optical values on FastIron 07.3.00h > > Hello, > > is there any "hidden" command e.g. on 07.3.00h for printing out optical > values, when a link is not fully connected? > > For example, using the same vendor optic between sites A and B, B shows > no TX,RX at all. > > A: > > # show optic 11 > Port Temperature Tx Power Rx Power Tx Bias Current > +----+-----------+----------+------------+-------------------+ > 11 52.3906 C 000.8022 dBm -011.5676 dBm 30.178 mA > Normal Normal Normal Normal > > # show interfaces ethernet 11 | include up > 10GigabitEthernet11 is up, line protocol is up > Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual > fdx > > But site B: > > # show interfaces ethernet 11 | include line > 10GigabitEthernet11 is down, line protocol is down > > #show optic 11 > # (empty line) > > Regards > > Jörg > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
