Hello,
Does anyone also suffer from booting delays on MLXe with dual management
boards since jumping on 6.2f (or e)?
Modules:
M1 (left ):BR-MLX-MR2-X Management Module Active
M2 (right):BR-MLX-MR2-X Management Module
Standby(Ready State)
Booting times have jumped from smooth 2-3 minutes to around 10 - 15
minutes.
standby module complains on reload:
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode =
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode =
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode =
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode =
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode =
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode =
0)
(for long long time, then finally boots)
received status 0, tx_id
management module takes a significant delay on bootup:
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Regards
Jörg
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
