We have an MLXe with high-speed switch fabric modules. At the moment it’s running in Turbo mode with only Gen2 line cards (10 and 100 GbE). Since the claim is that the box does full line rate, each slot must perform at least at 200 Gb/s full-duplex in this mode. If we put a Gen1 card (BR-MLX-1GCx24-X) into the box, and reboot into Normal mode, what does this do to the per-slot bandwidth? We haven’t been able to track down any numbers (and we don’t have an SE to ask).
Thanks, Michael _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
