Hi,
this question is aimed at the ACME guys; I hope this is the right
place to ask the questions...
I have been using the original MCM Fox board for several months
developing software to be ported to a custom Etrax board based on the
100LX. We recently got the first new boards but can't get to boot. We
have been comparing SDRAM and Ethernet signals with those on a new Fox
board and found this very useful in diagnosing problems. Is it
possible to have the new Fox schematic put on the website?
We found a problem on our board where data bus lines D0 and D2 were
linked; making the same modification to the Fox board recreated the
symptoms. Also does anyone know if the Etrax requires DRAM to be
properly connected to boot in serial/ethernet mode?
Thanks in advance for our help,
Regards,
John Mackenzie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/foxboard/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/foxboard/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
