--- In [email protected], "paddywalld" <[EMAIL PROTECTED]> wrote: > > Hi, > > Now I tried it with a cross cable, but nothing changed. > And I don´t believe that the power supply is not correct, because I > use the Power supply unit from the ACME Shop with the FOX Board LX. > > But if I close the Jumper 8 and start the board, only the green LED is > flashing. As soon as I type "boot_linux -F". All 3 LED´s are beginning > to flashing. > > What should I do? I´m a little bit despaired. > > Please help me. > Best Regards > Patrick Hennig >
Hello, I've got also a problem to flash thru lan. I launch boot_linux -F, close the jumper J8, and restart the fox board. All seems to be ok, but when I remove the J8 jumper and restart, the board seems to be blank. I also try with 2 differents power supply, with 2 PC and so on. The only way I've found ti flash thru lan is : close jumper J8 launch boot_linux -F little short cut on shutdow connector ( not power off/on) Good luck Eric
