Le Mardi 5 Décembre 2006 12:02, jlivingstonsg1 a écrit : > --- In [email protected], Michel Xhaard <[EMAIL PROTECTED]> wrote: > > Le Mardi 5 Décembre 2006 10:18, jlivingstonsg1 a écrit : > > > Hi Michel. > > > > > > Do you have a fimage with > > > "Spca5xx-Light-Edition" > > > with the driver "rt73" (for "Linksys WUSB54GC" wifi) > > > on your website > > > http://mxhaard.free.fr/embedded.html ? > > > > > > I can´t find it on your web site. > > > > > > I have tried the "fimage_716_v100.tar.gz" but it seem to be > > missing > > > > the "rausb0" file. > > > http://mxhaard.free.fr/spca50x/embedded/AcmeFox/ > > Foxboard_fimage716- > > > > LE08/Doc_fimage_716.txt > > > The command "ifconfig rausb0 192.168.0.55" fail to work and I > > cant > > > > find the "rausb0" file. > > > ---- > > > I have the Debian in VMware and WinSCP and would like to try > > > http://tech.groups.yahoo.com/group/foxboard/message/2206 > > > but I dont understand how to patch with the > > > "linux-2.4.31LE08.patch" > > > Were do I put the "linux-2.4.31LE08.patch" in debian to be able > > > to run > > > "patch -p1 < linux-2.4.31LE08.patch" ? > > > > You need to have the kernel 2.4.31 installed from the acmesystems > > SDK I did > > > not know Debian and VMware sorry > > --------- > I have followed the installation by > http://www.acmesystems.it/?id=43 > and the foxboard say "2.4.31" when executing > "uname -a" > --------------- > > > > Because then I could maybe try the > > > http://tech.groups.yahoo.com/group/foxboard/message/2206 > > > to get the driver "rt73" to work. > > > > don't know the rt73 driver sorry. My source is set with the: > > rt2570 for the Linksys WUSB54GV4 or the D-Link DWL-122 B1 > > the file > > Doc_fimage_716.txt > > explain how you can used it > > --------------- > The "ifconfig rausb0 192.168.0.55" fail to work. > > If I could make the driver "rt2570" to work then I could use the > http://tech.groups.yahoo.com/group/foxboard/message/2206 > to make the driver "rt73" to work. > > Are you sure the "fimage_716_v100.tar.gz" is ok? It work for me :) > > It is missing a file called "rausb0".
rausb0 come when you insmod the rt2570 module > ------------- > > > > But if somebody have a fimage with "Spca5xx-Light-Edition" > > > with the driver "rt73" please send it to me. :) > > > > > > [EMAIL PROTECTED] > > > > > > Regards Magi > > > > > > --- In [email protected], Michel Xhaard <mxhaard@> wrote: > > > > Le Lundi 4 Décembre 2006 23:06, jlivingstonsg1 a écrit : > > > > > Hello. > > > > > > > > > > I have the fimage_716_v100.tar.gz but it seem like the > > > > > "rausb0" is missing. > > > > > > > > > > I have read this > > > > > http://tech.groups.yahoo.com/group/foxboard/message/2206 > > > > > but I am missing the file "rt_config.h" > > > > > > > > > > I have tried to patch in VMware and "make" but I am to stupid > > to > > > > > > understand how to patch. > > > > > > > > > > Does anybody have a fimage with > > > > > Spca5xx-Light-Edition > > > > > > > > The binary and source code are available on my website :) > > > > > > > > > and > > > > > driver "rt73" for wifi? > > > > > > > > > > Regards Magi > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > -- > > > > Michel Xhaard > > > > http://mxhaard.free.fr > > > > > > Yahoo! Groups Links > > > > -- > > Michel Xhaard > > http://mxhaard.free.fr > > Yahoo! Groups Links > > > -- Michel Xhaard http://mxhaard.free.fr
