I have decided to change my SDK to GNU and not uclib and this looks
like it works. The owserver program now starts at least and produces
some output. I still get no result but maybe there is a hardware
problem as the program complains about shorted 1-wire bus. I will
try another DS2480B chip to see if there is no misunderstanding
because of faulty or wrongly soldered chips.
I used a 2.4 kernel but will try a 2.6 kernel later. I will put my
results once I have some success or complete failure.
Jos
--- In [email protected], "joshartman" <[EMAIL PROTECTED]> wrote:
>
> I have removed my current SDK and regenerated it again with 2.4
> kernel and still get the same compile errors for fuse and core
dump
> when running owserver.
>
> I am using Slackware if this says something.If you are interested,
I
> can sent you the compiler output if this help.
>
> I am not sure how to proceed here as I have tried all logical
> options and hope you have some idea how to proceed or try.
>
> Jos
>
>
> --- In [email protected], "d1mag1" <mag@> wrote:
> >
> >
> > BTW: I noticed in your "install fox development" that you use
the
> 2.6-
> > kernel... I have never tried to build owfs with that kernel
since
> it
> > was too big when I tried it the first time.
> >
> > Could you try to build it with the 2.4.31 kernel once?
> >
> > /Christian
> >
>
