Hi. Then how do I check the kernel? What am i to look for in ifconfig when I use dlink for instance C1 ?
Can somebody please make a detailed description on what to do with settings in VMware with version 108 of FOX Board SDK ? Can somebody write a step by step description? I really want this to work because I am tierd in testing. I am not sure what to do. I use Kernel 2.4. and uClibc. Regards Magi ---------------------------------- --- In [email protected], John Crispin <[EMAIL PROTECTED]> wrote: > > ok, > > the sticks are loaded by the kernel ? ifconfig show the devices ? and > communication works as long as the webcam is not running ? > > > i am using a labtech and a dlink C1 - all works fine > > > > Quoting jlivingstonsg1 <[EMAIL PROTECTED]>: > > > > > Hi John. > > > > I have: > > > > Linksys WUSB54GC-EU(RT73 maybe)(0x066b,0x077b,0x13b1,0x1915,)/ 0x0020 > > ASUS-167G (RT2570 Probably) 0x0b05/0x1707 > > Hercules HWGUSB2-54 (RT2570 Probably) ??????/????? > > D-LINK DWL-G122 C1 Ver:3 0x2001/0x3c03 > > > > ASUS-167G and Hercules HWGUSB2-54 work some with > > fimage_716_v100.tgz / > > http://mxhaard.free.fr/etrax.html / > > http://mxhaard.free.fr/spca50x/embedded/AcmeFox/ Foxboard_fimage716- > > LE08/Doc_fimage_716.txt > > > > But when I send commands and have the webcam(creative webcam notebook) > > on it stop and i have to restart the foxboard. > > > > > > Regards Magi > > > > > > --------------------------------------------- > > --- In [email protected], John Crispin <john@> wrote: > >> > >> what manufacturers are you dongles ? > >> also, what vid/pid do the dongles have ? > >> > >> > >> Quoting jlivingstonsg1 <jlivingstonsg1@>: > >> > >> > Hi . > >> > > >> > I need a detailed description on how to set up my FoxBoard > >> > with WIFI/WLAN dongle and webcam. > >> > I have version 108 of FOX Board SDK and can make a fimage and get > >> > the webcam to work but I can not make the WIFI/WLAN dongle to > > work. > >> > I need to know exactly what chipset to use to > >> > B1 and C1 and the 3:rd option. > >> > I have now 4 dongles and can not get any of them to work with any > > of > >> > the B1 and C1 settings. > >> > Can somebody make a detailed description what settings to make in > > the > >> > SDK Configuration to get both the webcam and a WIFI/WLAN dongle to > >> > work at the same time? > >> > > >> > Regards Magi > >> > > >> > > >> > > > > > > >
