Hi all, i'd been this problem before. and know the fox works well. It was certernly my falt because i'd stoped the board during a flashing and after all the leds was on and nothing happended anymore :-(
after a tiny nervous breakdown, i'd tried to flash again and again and again. and a day it have worked again. well try to download al full OS image on the acme's web site : THE Factory default images http://www.acmesystems.it/?id=704 # cd /tmp # wget http://www.acmesystems.it/articles/00704/fimageLX416_221106.tgz # tar -xzvf fimageLX416_221106.tgz after that flash it in the bestiest condition as you can (like one switch with only your computer and the fox connected to it) try to put your ip like 192.168.0.10(it's an exemple all in the address range 192.168.0.1-192.168.0.254 (except the .90 -> it's the fox) and flashit you need to put a link on the jumper named J8 see here : http://www.acmesystems.it/articles/00004/scheme_foxlx.jpg see the jumper for lan boot with the SDK try # . init_env # boot_linux -F -i /tmp/fimageLX416_221106 or with the explorer on 192.168.0.90 -> full reset or flashing i don't remember. and for the end change the defaul mac adress for turn off the red ligth who's always on. here : http://www.acmesystems.it/?id=57#2000 -> Change the MAC address for me it'd worked i hope for you too guys :-) Laurent --- In [email protected], "francis.pressecq" <[EMAIL PROTECTED]> wrote: > > Hi, > I have the same problem : 3 leds remain ON after power on... and > impossible to ping the board. > I am interesting by the solution. > > Regards, > Francis > > --- In [email protected], "levene_paul" <paullevene@> wrote: > > > > Hello, > > > > I have a new board with the same problem. Did you manage to > resolve > > the issue? > > > > If you cannot get a LAN connect, how can you reflash the board? > > > > If the board is broken, can it be replaced ?? > > > > Paul > > Student of the Unversity of the West of England > > Bristol UK > > >
