Hi John. If you get time over please put the fimage in "Files" here in the Yahoo Foxboard groupe.
I would like to be sure to get one that works because I think I have tried to flash my Foxboard with that 2.4.31 and webcam and wifi. I probably do something wrong and need a working fimage. Regards Magi --- In [email protected], John Crispin <[EMAIL PROTECTED]> wrote: > > Hello Magi... > > dont see what your problem is the image i just compiled on 2.4.31 > works fine, i am looking at myself using a C1, labtech webcam and 2.4.31 > here is some info to prove it > > # cat /proc/bus/usb/drivers > usbdevfs > hub > rtl8150 > serial > usb-storage > rt73 > zd1211b > spca5xx > # ifconfig rausb0 > rausb0 Link encap:Ethernet HWaddr 00:15:E9:BA:90:3B > inet addr:192.168.10.90 Bcast:192.168.10.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:16458 (16.0 KiB) > > # iwconfig rausb0 > rausb0 RT73 WLAN ESSID:"" > Mode:Ad-Hoc Frequency=1 MHz Cell: BA:C1:97:A5:B0:D0 > Bit Rate=11 Mb/s > RTS thr:off Fragment thr:off > Encryption key:off > Link Quality=0/100 Signal level:-121 dBm Noise level:- 115 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > # ps | grep serv > 145 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070 > 147 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070 > 148 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070 > 151 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070 > 157 root 576 S grep serv > # uname -a > Linux axis 2.4.31 #99 Sun Mar 25 23:55:35 CEST 2007 cris unknown > # > > Quoting jlivingstonsg1 <[EMAIL PROTECTED]>: > > > Hi John. > > > > Whell if it work stabile with webcam and wifi in 2.6.15 > > after patch then yes please. > > > > But if the 2.6.15 is unstab with wifi and webcam > > why not patch the 2.4.31 with the wifi, but not with rt2570 but > > with chipset of Wifi (D-link C1) ?? > > > > > > www.gamereality.se > > > > Regards Magi > > > > > > --- In [email protected], John Crispin <john@> wrote: > >> > >> there is a usb problem on 2.6.15 that causes the fox to hang when > > wifi > >> and webcam are operated simultaniously > >> > >> i can however patch the 2.6.15 kernel to include spca support if > > you > >> need it ?!? > >> > >> John > >> > >> Quoting xfingerfox32 <xfinger@>: > >> > >> > Hi Magi, > >> > > >> > Did you have any problem setting up Wifi (D-link B1) and SPCA5xx > >> > together for kernel 2.4? > >> > The phrozen (John) has a Wifi patch for 2.6.15 - D-Link B1 and > > C1, > >> > have you try it? Perhaps he patched SPCA5xx too (It says so). > >> > I have not try it cause it patches a lot of things, and i would > > like > >> > only SPCA5xx and USB if it necessary. > >> > > >> > http://www.acmesystems.it/articles/00140/ > > phrozen_sdk_patch_beta1.tar.b > >> > z2 > >> > > >> > If you know how to patch only Wifi + SPCA + USB and test it, > > please > >> > let us know. > >> > > >> > Regards, > >> > Alexander > >> > > >> > --- In [email protected], "jlivingstonsg1" > >> > <jlivingstonsg1@> wrote: > >> >> > >> >> > >> >> Hi. > >> >> > >> >> I would really totally love to get that to. > >> >> > >> >> A fimage like "fimage_716_v100" from > >> >> http://mxhaard.free.fr/spca50x/embedded/AcmeFox/ > > Foxboard_fimage716- > >> >> LE08/ > >> >> for kernel 2.6.15 with wifi would be even greater. :) > >> >> > >> >> > >> >> Regards Magi > >> >> > >> >> > >> >> > >> >> --- In [email protected], "xfingerfox32" <xfinger@> > > wrote: > >> >> > > >> >> > Hello, > >> >> > > >> >> > Is there a SPCA5xxLE patch for the standard kernel 2.6.15? > >> >> > > >> >> > thanks > >> >> > Alexander > >> >> > > >> >> > >> > > >> > > >> > > >> > > > > > > >
