Hi Sergio ! I am coming back to you with my problem not yet solved. As I am a new foxboard user, it took time to set up a clean configuration. As my foxboard doesn't work at the first power up (3 leds remain ON), I have tried, as you recommand, to reflash the board. I have tried to reflash the board using the new software directly under XP and using the virtual machine. In the 2 cases, the result is the same : when the J8 jumper is closed, the green LED is ON and the others are OFF. After typing the boot command, all the LED become ON... and nothing happen !!!! I have checked the network activity with my router : there is activity between foxboard and virtual machine.
Do you have an idea ???? Regards, Francis ----- Message d'origine ---- De : Sergio Tanzilli <[EMAIL PROTECTED]> À : francis PRESSECQ <[EMAIL PROTECTED]> Envoyé le : Mercredi, 7 Mars 2007, 10h56mn 36s Objet : FOX Board Hi Francis >In my case, it is the first powerup. I am using a mother board SX18 >purchased at lextronic on which I have plugged the fox card. The fox >board is a FOXLX832. All the leds (3) remain ON. I have followed the >procedure described in the getting started paper. Can you try to reflash the board by LAN as described here ? http://www.acmesystems.it/?id=703 Sergio ----- Message d'origine ---- De : Sergio Tanzilli <[EMAIL PROTECTED]> À : [email protected] Envoyé le : Mercredi, 7 Mars 2007, 6h04mn 49s Objet : Re: [foxboard] Re: fox board does not work ! Hi Francis and Paul Have you had this problem at the first power up or after a reflash of the board ? Sergio francis.pressecq wrote: > > > Hi, > I have the same problem : 3 leds remain ON after power on... and > impossible to ping the board. > I am interesting by the solution. > > Regards, > Francis > > --- In [EMAIL PROTECTED] s.com <mailto:foxboard% 40yahoogroups. com>, > "levene_paul" <paullevene@ ...> wrote: > > > > Hello, > > > > I have a new board with the same problem. Did you manage to > resolve > > the issue? > > > > If you cannot get a LAN connect, how can you reflash the board? > > > > If the board is broken, can it be replaced ?? > > > > Paul > > Student of the Unversity of the West of England > > Bristol UK > > > ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com [Non-text portions of this message have been removed]
