Hi Thedos1701, please check on this page info: http://www.acmesystems.it/?id=833
and look if you have a LX816 or a LX416 The only reason why you should receive this message is if you are trying to flash a 8MB image on a 4MB Fox Flash size. Anyway try to flash the Fox with a LX416 image and see if it is working (you should always be able to flash a 4MB image on a 8MB Fox). Please report here your findings. Since the flash procedure is not completed your Fox should be still functional with the original image. Try to do a df command on the Fox from a console or telnet or ssh session with the Fox and please report the output data. Best regards, Roberto Asquini thedos1701 ha scritto: > > hi all i have still recived the foxboard lx 816 and i had a big > problem while trying to flashing it. > I couldn't flash the fox by ftp and web, so i tried do flash it with > the sdk but the board sent to me this message > PACKET_INFO > 0xc0004000 > 0x00800018 > Checksum of file is 0x691e2b6f > FLASH > 0xc0004000 > 0x00000000 > 0x00800000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > Fatal: flash is too small. > END > Exiting with code 0 > > before i tried to flash it the board was working fine with the > factory installed flash. > If i try to put on the board a flash image downloaded from the Acme > System site i received the same error. > > Thanks to all! > > > > __________ Informazione NOD32 2187 (20070413) __________ > > Questo messaggio รจ stato controllato dal Sistema Antivirus NOD32 > http://www.nod32.it -- Roberto Asquini Acme Systems srl [EMAIL PROTECTED] http://www.acmesystems.it
