Hi Roberto,
the output of the boot process of my fimage with 2.4.31
is attached below.
Hardware:
SX18 board "SX18 R.1.1"
with "red" classic Fox board -> RTC works
with LX816 Fox board -> RTC fails
I checked again the schematics and pinouts and wonder why
it does not work with the LX816.
When I try the fimageLX816_200207 from the repository
I also cannot access the RTC with the LX816 ("ds1302: RTC not found")
Here is the listing of the boot up messages:
> > __________ Informazione NOD32 2187 (20070413) __________
-----------------------------------------------------------------
Uncompressing Linux...
Done. Now booting the kernel.
Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.2.1 Axis release
R63/1.63) #8 Sat Mar 3 03:48:53 CET 2007
Setting up paging and the MMU.
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Linux/CRIS port on ETRAX 100LX (c) 2001, 2002 Axis Communications AB
Kernel command line: root=/dev/mtdblock3 init=/linuxrc
ds1302: RTC not found.
Enabling watchdog...
Calibrating delay loop... 99.73 BogoMIPS
Memory: 14136k/16384k available (1086k kernel code, 2248k reserved,
301k data, 40k init)
kmem_create: Forcing size word alignment - mm_struct
kmem_create: Forcing size word alignment - filp
Dentry cache hash table entries: 2048 (order: 1, 16384 bytes)
Inode cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - inode_cache
Mount cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
kmem_create: Forcing size word alignment - kiobuf
Buffer cache hash table entries: 2048 (order: 0, 8192 bytes)
Page-cache hash table entries: 2048 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
Initializing RT netlink socket
Starting kswapd
kmem_create: Forcing size word alignment - file_lock_cache
kmem_create: Forcing size word alignment - nfs_read_data
kmem_create: Forcing size word alignment - nfs_write_data
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
kmem_create: Forcing size word alignment - jffs_node
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
kmem_create: Forcing size word alignment - blkdev_requests
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
SCSI subsystem driver Revision: 1.00
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
rtl8150.c: rtl8150 based usb-ethernet driver v0.4.3 (2002/12/31)
usb.c: registered new driver rtl8150
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for FTDI SIO
usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
usbserial.c: USB Serial support registered for USB-UIRT Infrared
Tranceiver
usbserial.c: USB Serial support registered for Home-Electronics TIRA-1
IR Transceiver
ftdi_sio.c: v1.3.5:USB FTDI Serial Converters Driver
usbserial.c: USB Serial support registered for PL-2303
pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2005 Axis Communications AB
eth0 initialized
eth0: changed MAC to 00:40:8C:CD:00:00
ETRAX 100LX serial-driver 1.75 $, (c) 2000-2003 Axis Communications AB
ttyS0 at 0xb0000060 is a builtin UART with DMA
ttyS2 at 0xb0000070 is a builtin UART with DMA
ttyS3 at 0xb0000078 is a builtin UART with DMA
fast_timer_init()
cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
cse0: Probing for AMD compatible flash...
cse0: Found no AMD compatible device at location zero
Amd/Fujitsu Extended Query Table v0.0 at 0x0040
cse0: JEDEC Device ID is 0xE0. Assuming broken CFI table.
cse0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
cse1: Probing for AMD compatible flash...
cse1: Found no AMD compatible device at location zero
CFI: Found no cse1 device at location zero
cse0: 0x00800000 bytes of flash memory.
Found a valid partition table at 0xf001000a-0xf0010056.
/dev/flash1 at 0x00010000, size 0x00350000
/dev/flash2 at 0x00360000, size 0x004a0000
Adding readonly flash partition for romfs image:
/dev/flash3 at 0x000ba893, size 0x00202000
Creating 4 MTD partitions on "cse0":
0x00000000-0x00010000 : "part0"
0x00010000-0x00360000 : "part1"
0x00360000-0x00800000 : "part2"
0x000ba893-0x002bc893 : "romfs"
GPIO port G: in_bits: 0x3FFFFF3E out_bits: 0x3E00003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF00
ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis
Communications AB
usb-host.c: ETRAX 100LX USB-HCD $Revision: 1.23 $ (c) 2001-2003 Axis
Communications AB
usb-host.c: ETRAX 100LX USB on-chip controller version 0x10
GPIO port G: in_bits: 0x3FFFFF3E out_bits: 0x3E00003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF00
GPIO port G: in_bits: 0x01FFFF3E out_bits: 0x3200003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF00
kmem_create: Forcing size word alignment - top_half_reg_cache
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 40k freed
/linuxrc: Mounting /mnt/flash... Using fallback suid method
done
/linuxrc: Starting init.
init: starting up.
Starting system initialization.
Axis Linux, http://developer.axis.com/
Copyright (C) 2000-2005 Axis Communications AB
FOX release 2.01
[32;01m*[0m Mounting filesystems...
mount: Mounting sysfs on /sys failed: No such device
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Initializing /var...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Determining MAC address...
Warning: Parameter SERNO not found.
[A[4C[33;01m![0m /etc/rcS.d/S20mac: Cannot determine serial number!
[A[4C[32;01m+[0m no serial number, using default MAC address:
00:40:8C:CD:00:00
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Initializing random number generator...
Warning: Parameter SERNO not found.
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Setting hostname...
Warning: Parameter SERNO not found.
[A[4C[33;01m![0m /etc/rcS.d/S25hostname: Cannot determine serial
number!
[A[4C[32;01m+[0m no serial number, using default hostname: axis
[A[4C[32;01m+[0m hostname: "axis"
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Initializing volatile resolver configuration...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
System initialization is done.
New runlevel: 3
[32;01m*[0m Starting respawn daemon...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting system and kernel logger...
Jan 1 00:00:05 axis syslogd 1.4.1: restart.
[A[4C[32;01m+[0m system logger started
[A[4C[32;01m+[0m kernel logger started
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Bringing lo up...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Bringing eth0 up...
[A[4C[32;01m+[0m media: auto
[A[4C[32;01m+[0m IP address: 192.168.1.90
[A[4C[32;01m+[0m netmask: 255.255.255.0
[A[4C[32;01m+[0m broadcast address: 192.168.1.255
route: SIOC[ADD|DEL]RT: Network is unreachable
[A[4C[31;01m![0m /etc/rc3.d/S22net.eth0: route failed!
[2A[71C[34;01m[ [31;01mfail[34;01m ][0m
[32;01m*[0m Waiting for a network interface...
[A[4C[32;01m+[0m eth0 is up
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting telnet server...
telnetd: starting
port: 23; interface: any; login program: /bin/login;
maximum number of allowed simultaneous clients: unlimited
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting ftp server...
Jan 1 00:00:07 axis vftpd[75]: Starting vftpd 0.01
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting ssh server...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
Jan 1 00:00:07 axis dropbear[87]: Running in background
[32;01m*[0m Starting web server...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting SSL tunnel...
[A[4C[32;01m+[0m disabled
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
All scripts for runlevel 3 are done.
/bin/sh: can't access tty; job control turned off
# hwclock
hwclock: Could not access RTC: No such file or directory
# uname -a
Linux axis 2.4.31 #8 Sat Mar 3 03:48:53 CET 2007 cris unknown
# Uncompressing Linux...
Done. Now booting the kernel.
Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.2.1 Axis release
R63/1.63) #8 Sat Mar 3 03:48:53 CET 2007
Setting up paging and the MMU.
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Linux/CRIS port on ETRAX 100LX (c) 2001, 2002 Axis Communications AB
Kernel command line: root=/dev/mtdblock3 init=/linuxrc
ds1302: RTC not found.
Enabling watchdog...
Calibrating delay loop... 99.73 BogoMIPS
Memory: 14136k/16384k available (1086k kernel code, 2248k reserved,
301k data, 40k init)
kmem_create: Forcing size word alignment - mm_struct
kmem_create: Forcing size word alignment - filp
Dentry cache hash table entries: 2048 (order: 1, 16384 bytes)
Inode cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - inode_cache
Mount cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
kmem_create: Forcing size word alignment - kiobuf
Buffer cache hash table entries: 2048 (order: 0, 8192 bytes)
Page-cache hash table entries: 2048 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
Initializing RT netlink socket
Starting kswapd
kmem_create: Forcing size word alignment - file_lock_cache
kmem_create: Forcing size word alignment - nfs_read_data
kmem_create: Forcing size word alignment - nfs_write_data
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
kmem_create: Forcing size word alignment - jffs_node
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
kmem_create: Forcing size word alignment - blkdev_requests
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
SCSI subsystem driver Revision: 1.00
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
rtl8150.c: rtl8150 based usb-ethernet driver v0.4.3 (2002/12/31)
usb.c: registered new driver rtl8150
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for FTDI SIO
usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
usbserial.c: USB Serial support registered for USB-UIRT Infrared
Tranceiver
usbserial.c: USB Serial support registered for Home-Electronics TIRA-1
IR Transceiver
ftdi_sio.c: v1.3.5:USB FTDI Serial Converters Driver
usbserial.c: USB Serial support registered for PL-2303
pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2005 Axis Communications AB
eth0 initialized
eth0: changed MAC to 00:40:8C:CD:00:00
ETRAX 100LX serial-driver 1.75 $, (c) 2000-2003 Axis Communications AB
ttyS0 at 0xb0000060 is a builtin UART with DMA
ttyS2 at 0xb0000070 is a builtin UART with DMA
ttyS3 at 0xb0000078 is a builtin UART with DMA
fast_timer_init()
cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
cse0: Probing for AMD compatible flash...
cse0: Found no AMD compatible device at location zero
Amd/Fujitsu Extended Query Table v0.0 at 0x0040
cse0: JEDEC Device ID is 0xE0. Assuming broken CFI table.
cse0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
cse1: Probing for AMD compatible flash...
cse1: Found no AMD compatible device at location zero
CFI: Found no cse1 device at location zero
cse0: 0x00800000 bytes of flash memory.
Found a valid partition table at 0xf001000a-0xf0010056.
/dev/flash1 at 0x00010000, size 0x00350000
/dev/flash2 at 0x00360000, size 0x004a0000
Adding readonly flash partition for romfs image:
/dev/flash3 at 0x000ba893, size 0x00202000
Creating 4 MTD partitions on "cse0":
0x00000000-0x00010000 : "part0"
0x00010000-0x00360000 : "part1"
0x00360000-0x00800000 : "part2"
0x000ba893-0x002bc893 : "romfs"
GPIO port G: in_bits: 0x3FFFFF3E out_bits: 0x3E00003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF00
ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis
Communications AB
usb-host.c: ETRAX 100LX USB-HCD $Revision: 1.23 $ (c) 2001-2003 Axis
Communications AB
usb-host.c: ETRAX 100LX USB on-chip controller version 0x10
GPIO port G: in_bits: 0x3FFFFF3E out_bits: 0x3E00003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF00
GPIO port G: in_bits: 0x01FFFF3E out_bits: 0x3200003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF00
kmem_create: Forcing size word alignment - top_half_reg_cache
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 40k freed
/linuxrc: Mounting /mnt/flash... Using fallback suid method
done
/linuxrc: Starting init.
init: starting up.
Starting system initialization.
Axis Linux, http://developer.axis.com/
Copyright (C) 2000-2005 Axis Communications AB
FOX release 2.01
[32;01m*[0m Mounting filesystems...
mount: Mounting sysfs on /sys failed: No such device
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Initializing /var...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Determining MAC address...
Warning: Parameter SERNO not found.
[A[4C[33;01m![0m /etc/rcS.d/S20mac: Cannot determine serial number!
[A[4C[32;01m+[0m no serial number, using default MAC address:
00:40:8C:CD:00:00
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Initializing random number generator...
Warning: Parameter SERNO not found.
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Setting hostname...
Warning: Parameter SERNO not found.
[A[4C[33;01m![0m /etc/rcS.d/S25hostname: Cannot determine serial
number!
[A[4C[32;01m+[0m no serial number, using default hostname: axis
[A[4C[32;01m+[0m hostname: "axis"
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Initializing volatile resolver configuration...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
System initialization is done.
New runlevel: 3
[32;01m*[0m Starting respawn daemon...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting system and kernel logger...
Jan 1 00:00:05 axis syslogd 1.4.1: restart.
[A[4C[32;01m+[0m system logger started
[A[4C[32;01m+[0m kernel logger started
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Bringing lo up...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Bringing eth0 up...
[A[4C[32;01m+[0m media: auto
[A[4C[32;01m+[0m IP address: 192.168.1.90
[A[4C[32;01m+[0m netmask: 255.255.255.0
[A[4C[32;01m+[0m broadcast address: 192.168.1.255
route: SIOC[ADD|DEL]RT: Network is unreachable
[A[4C[31;01m![0m /etc/rc3.d/S22net.eth0: route failed!
[2A[71C[34;01m[ [31;01mfail[34;01m ][0m
[32;01m*[0m Waiting for a network interface...
[A[4C[32;01m+[0m eth0 is up
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting telnet server...
telnetd: starting
port: 23; interface: any; login program: /bin/login;
maximum number of allowed simultaneous clients: unlimited
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting ftp server...
Jan 1 00:00:07 axis vftpd[75]: Starting vftpd 0.01
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting ssh server...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
Jan 1 00:00:07 axis dropbear[87]: Running in background
[32;01m*[0m Starting web server...
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
[32;01m*[0m Starting SSL tunnel...
[A[4C[32;01m+[0m disabled
[2A[72C[34;01m[ [32;01mok[34;01m ][0m
All scripts for runlevel 3 are done.
/bin/sh: can't access tty; job control turned off
# hwclock
hwclock: Could not access RTC: No such file or directory
# uname -a
Linux axis 2.4.31 #8 Sat Mar 3 03:48:53 CET 2007 cris unknown
#
