Quoting "persson.christer" <[EMAIL PROTECTED]>: > Hi! > Some hardware questions that I couldn't find on the acmesystems > homepage. I'm up to design a main board where I'm going to put > connectors to attach a FOX-board (the J6 and J7 on the FoxB). > Ok
> Can I use the USB signals from the J6/J7 down onto a main board and > into an USB-connector there..? Or do I need an USB-transciever on my > main-board? there is a special pinhole connector directly under the USB ports that you can use for this (see mechanical drawing) so no transceiver is needed > > Is there any schematics on the FOX-boad to download? No, there are mechanical drawings, but no schematic > > Can I use the 3V3 from the J6/J7 connector to supply other curcuit on > my main-board...how much current can I "steal"? yes and i do not know how much, ask roberto about this <[EMAIL PROTECTED]> > > Can I in some way use the ttyS0 as a serial port..? yes, you need to modify the kernel config, there is an article on the acmesystems homepage > > Thanks! > >
