Hi, I have a Fox832 with the foxserve Kdev firmware. I installed the webcamserver (driver and software) as is shown on http://www.kdev.it/HTDOCS/webcamserver.html When I connect my webcam and start webcamserver.sh.... ...the server find the webcam with an error (please, take a look to the log below). Than http://192.168.0.96:8888 show nothing.
Scuse me for my english bye bye Antonio /mnt/flash/webcamserver]98# ./webcamserver.sh Using /mnt/flash/kernel/drivers/media/video/videodev.ko Using pwc.ko Using quickcam.ko Using /mnt/flash/kernel/drivers/media/video/spca5xx.ko /mnt/flash/webcamserver]98# tail -f /var/log/messages kernel: pwc: Philips webcam module version 10.0.11-unofficial loaded. kernel: pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. kernel: pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, kernel: pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. kernel: usbcore: registered new driver Philips webcam kernel: usbcore: registered new driver quickcam kernel: /devboard-R2_01/apps/spca5xx/spca_core.c: USB SPCA5XX camera found. Type Creative Instant P0620 kernel: usbcore: registered new driver spca5xx kernel: /devboard-R2_01/apps/spca5xx/spca_core.c: spca5xx driver 00.57.06LE registered kernel: hc-crisv10 hc-crisv10.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
