Hi Andrea, I am presently working on a new Fox VHDL board that can accommodate the A3P1000 chip. They are not 100% pin compatible but mostly. Mainly the A3P1000 has more pins of I/O instead of NoConnect pins of the A3P250 but logical pin position is not maintained so a simple remapping will be needed to port an existing application from A3P250 to A3P1000. I can't say yet the release date but I will let you know shortly.
Best regards, Roberto Asquini Andrea Maccaferri ha scritto: > > Is it possible to have a vhdl board with bigger atmel fpga ? > I mean A3P600 or A3P1000 ? > Are they pin compatible ? > I have an application where more resource inside can help me > > best regards > Andrea Maccaferri > > Sergio Tanzilli ha scritto: > > > > Hi to all > > > > We are design a new board with Atmel AT91SAM9260 (ARM9). Very soon a FAQ > > web page will be published to get comments and tips on this new project. > > > > The FOX Board LX832 will live as is for long time but we would like to > > add a new series of boards based on that chip. > > > > Sergio Tanzilli > > Acme Systems srl > > > > > The Etrax FS is a different chip: it only has 1 USB but 2 ethernet > > > ports, so that would require a new board alltogether. Also, I don't > > > think they are pin compatible. > > > > > > Axis makes a board for the Etrax FS, and if you want a board with an > > ARM > > > chip, there's plenty of vendors there as well. But they target > > different > > > embedded markets. > > > > > > Dave > > > > > > > > > */sigle <[EMAIL PROTECTED] <mailto:sigle666%40hot.ee> > <mailto:sigle666%40hot.ee>>/* wrote: > > > > > > Is it possible change in the Foxboard 100 Mhz Etrax 100LX --> 200 > > > Mhz Etrax FX? > > > > > > In the first foxboards was CPU, RAM and ROM in the same chip (etrax > > > 100LX MCM 4+16). > > > Then they put CPU and memory separately - cpu (etrax 100lx) and > > > separately ROM 8 MB + RAM 32 MB. > > > Next step may be faster processor etrax FX in the foxboard - why > > > someone dont made such system (200 Mhz etrax FX + separately 8MB RAM > > > + separately 32 MB RAM = all in the foxboard). > > > > > > The same is with ARM processors: 60 Mhz ARM7 have RAM + ROM in the > > > chip (philips, cirrus, etc), but 200 MHZ ARM9 have no RAM and ROM in > > > the chip (philips, cirrus, etc) :( > > > > > > > > > > > > ------------------------------ > > > New York Times: Vene mõjuvõim Baltikumis suureneb > > > Loe lähemalt Eesti Päevaleht Online'ist: www.epl.ee/artikkel/407508 > > > <http://www.epl.ee/artikkel/407508 > <http://www.epl.ee/artikkel/407508> <http://www.epl.ee/artikkel/407508 > <http://www.epl.ee/artikkel/407508>>> > > > > > > > > > > > > > > > -- Roberto Asquini Acme Systems srl [EMAIL PROTECTED] http://www.acmesystems.it
