Hi Torsten,
On Thursday 06 December 2007 18:48:41 Torsten Günter wrote:
> i have a foxboard and want do connect the "arduino diciemila" over one of
> the usb-ports. If i connect it nothing will happen. Normally i would have
> access to it over the ttyUSB0 or ttyUSB1. But in the devices there isnŽt
> any type of usb-device.
> Have anybody some ideas why this thing is happen?
I don't have a dicemilla, only an older "Arduino NG Rev.c" but it works out
of the box. That is, I plugged it into the FoxBoard for the first time this
morning and it works. But this is on a 2.6 Kernel! I don't know if the same
is true for Kernel 2.4
Here is the relevant part of the Kernel messages for the arduino:
--------------
usb 1-2: new full speed USB device using hc-crisv10 and address 2
ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
------------------
Could you Telnet into your Fox and post the Kernel-messages...
Eberhard
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/foxboard/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/foxboard/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
