Hi Steve, I see my error, I modify my code after you send. I have a activity now. I remove the jumper DTR/RTS. But all the servo move in same time. I test with the MiniSSCII mode. the controller is ok, i m test with a windows application. I'm search.
I posted in Pololu forum Thank you for your help. Olivier ----- Message d'origine ---- De : vulcansh <[EMAIL PROTECTED]> À : [email protected] Envoyé le : Samedi, 29 Décembre 2007, 7h11mn 50s Objet : Re : [foxboard] Re: FOXBOARD and POLOLU Servo Controller --- In [EMAIL PROTECTED] s.com, O G <electronia83@ ...> wrote: > > Hi Steve, > > My cable is correct. > I try my code on my UBUNTU, i have the same result... > I read and read again the doc, but i don't found my error... > > Olivier I think I see your problem. You are mixing the two operating modes, Mini SCI and Pololu Mode. Check the setting of the protocol jumper the document. Your first command is a Pololu command (which should write to flash and thus need only be done once) and the second (in the loop) is a Mini SCI command. Perhaps there is a forum for Pololu products. Steve Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail _____________________________________________________________________________ Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail http://mail.yahoo.fr
