Hi Paolo and ALberto Unfortunately we haven't had any patches to fix this problem so we have stopped the commercialization of this carrier board until we will found a solution. Right now we can just refound the board, I'm sorry :-(
Sergio > Ciao Paolo. > I have struggled with FOX and CAN for quite a long time (see my > posts), but eventually I have given up: couldn't get anything working. > now I have switched to another solution to my CAN communication > problem, but I would be glad to resume working on FOX. > Please keep me informed about any result you may get. > > Thanks in advance > Alberto > --- In [email protected] <mailto:foxboard%40yahoogroups.com>, > Paolo Chiarabaglio > <[EMAIL PROTECTED]> wrote: > > > > Hi all, > > > > I've bought a FOXCOM to use it with can bus but now I don't know > what to do. > > I've made a new image enabling the can driver. I flashed the board. > > > > My questions are: > > - what kind of driver does the sdk include? I've found this one on the > > internet, http://home.wanadoo.nl/arnaud/ > <http://home.wanadoo.nl/arnaud/> is this the right one? > > - Do I have to load the driver or something else? in /dev I have the > > can0 can1 can2 files but during boot I don't see messages telling the > > can driver is loaded. > > - Where can I find docs on how to use the driver? I've downloaded some > > examples from the above site but it says it can't open the can0 device! > > > > Thank you for your help! > > > > Paolo > > > >
