Hi there, I'm new to the whole embedded platform systems, but for my graduation project i have build a movable robot/car, which has the FOX 832 with the Axis 100LX processor on it. For this project it must be possible to control the robot from a distance, using a Wi-Fi connection between a pc and the FOX Board. The robot will also be equipped with an USB camera (the Hercules Webcam Deluxe).
My problem is, i don't know how to add drivers for the WiFi USB adapter, which i'll be using, and for the camera. Do i need to include these drivers into the firmware image and then flash the image into the board, or can i install those drivers directly onto the board? The USB WiFi adapter i'll be using is the WUSB54GC from Linksys, which uses the RaLink RT2x00 driver. If i need to include the drivers into the image, how? I've been looking for days but can't get it to work. I've done tutorials to create my own shared library or how to include my own program in the firmware image, but can't get any of that to work. Hope someone can give me some tips or solution. Thanks in advantage and sorry for the bad English. Best regards, Thijs Raven
