I could solve the problem, thanks for your help
--- In [email protected], Roberto Asquini <[EMAIL PROTECTED]> wrote: > > Hello Dan, > you are experimenting the problem we have seen on certain LAN cards > under Windows. > Please read the Troubleshooting area inside that article 703 and try to > use another PC for the flashing or install a different LAN card inside > your PC. > Alternatively you should install a complete SDK and flash from inside a > real Linux. We have seen that Linux manages to flash the Fox on the same > PC where Windows is unable to do it, with the same LAN card. Our > conclusion is that in some way the Windows driver is blocking the low > level traffic used by the flashing algorithm and we have not yet found a > solution on this problem under Windows. This is affecting roughly 10% of > the LAN cards inside PCs. No problem at all if you use Linux. > > Best regards, > > Roberto Asquini > > > danbaumann84 ha scritto: > > > > I followed all the steps in http://www.acmesystems.it/?id=703, > > <http://www.acmesystems.it/?id=703,> > > Appeared the message: > > Using internal boot loader: INTERNAL_NW - Network boot (default). > > Starting boot... > > We're doing a flash write, this may take up to a few minutes... > > > > > > the 3's led´s are shining and nothing happens to 3 hours, > > What's wrong? > > > > > > > -- > Roberto Asquini > Acme Systems srl > [EMAIL PROTECTED] > http://www.acmesystems.it >
