Hi all,
I have a strange problem with my foxboard.
In fact I'm not able to reflash with a new fimage.
I have connected the Fox by a cross-cable to my develop pc and of course
the fox and the pc are in the same lan, in fact the ping works and if
browse at the
foxboard IP I found the right homepage.
But from the directory:
/devboard-R2_01
when I give the following commands:
. init_env
boot_linux -F -i fimage
I received:
/Error socket: Operation not permitted
Make sure this program is executed with root privileges.
Of course I have moved the jumper to put the fox in boot mode.
I tried also with a windows pc with the program FlashFox, but
It's blocked with the following output.
_ _ _
| | (_) |
__ _ ___ _ __ ___ ___ ___ _ _ ___| |_ ___ _ __ ___ ___ _| |_
/ _` |/ __| '_ ` _ \ / _ \/ __| | | / __| __/ _ \ '_ ` _ \/ __| | | __|
| (_| | (__| | | | | | __/\__ \ |_| \__ \ || __/ | | | | \__ \_| | |_
\__,_|\___|_| |_| |_|\___||___/\__, |___/\__\___|_| |_| |_|___(_)_|\__|
__/ |
|___/
**************************************************************
e100boot made by axis.se, ported for windows by acmesystems.it
feedback, bugs : [EMAIL PROTECTED]
**************************************************************
Using device Broadcom NetXtreme Gigabit Ethernet Driver
Using internal boot loader: INTERNAL_NW - Network boot (default).
Starting boot...
We're doing a flash write, this may take up to a few minutes...
Does anyone have an idea of the problem?
With the same layout I have alreadu flashed many times the Fox.
Thank you in advance.
