Hi Marcelo, Yes i do this. ttyS0 is Ok. But when i plug my ZB enclosure, my FoxBoard don't boot.
Thznk you for your help Olivier ________________________________ De : Marcelo V <[email protected]> À : [email protected] Envoyé le : Mercredi, 6 Mai 2009, 15h35mn 44s Objet : Re: [foxboard] ZB enclosure + ttyS0 Hi! I have done this and it's easy... Follow this steps: Disabling all debug, kernel and syslogd messages, coming out from the ttyS0 serial port (physically on the J10 header), you will be able to use the ttyS0 as a general serial port without any disturbing boot and debug messages. To do this you have to change an option in the kernelconfig. (These notes are based on the new Fox Board SDK but can be adapted easily to the old one) Open the kernel options with the command: [..../devboard- R2_01]$ make kernelconfig in the "Hardware setup" submenu, look for "Product debug-port" and set it to "disabled". Enter in the directory packages/param/ syslog/developme nt-R1_1_0/ and edit the file syslog.conf so that the first line is like this: *.debug;kern. none /dev/null Only for kernel 2.6 >From the os/linux-2.6/ arch/cris/ arch-v10/ boot/compressed/ directory do a: [....boot/compresse d]$ rm misc.o Only for kernel 2.4 >From the /os/linux/arch/ cris/boot/ compressed/ directory do a: [....boot/compresse d]$ rm misc.o Now for any kernel version recompile the fimage with the command: [..../devboard- R2_01]$ make All boot and kernel messages are now gone. You can use the J10 serial port ttyS0 as a normal serial port without problems. And NOW you need to save this new fimage at FoxBoard Startup.. Please for more information go to this website: http://foxlx. acmesystems. it/?id=57 --> You can call me also... Best Regards, Marcelo Vitor Machado Siqueira Tel: +55 31 91558911 --- Em qua, 6/5/09, O G <electronia83@ yahoo.fr> escreveu: De: O G <electronia83@ yahoo.fr> Assunto: [foxboard] ZB enclosure + ttyS0 Para: foxbo...@yahoogroup s.com Data: Quarta-feira, 6 de Maio de 2009, 5:16 Hi, I have a problem when i active the ZB enclosure (MMC, RTC) and the ttys0 with the doc: How to disable the console port messages to enable the use of J10 as normal serial port /dev/ttyS0 from ACME site. My foxboard don't boot..... Please help me ! Thank you for your help ! Olivier ________________________________ Veja quais são os assuntos do momento no Yahoo! + Buscados: Top 10 - Celebridades - Música - Esportes
