There is also new din rail mounted DCM10E & DCM10F devices that will enable
Foxboro Fieldbus twin ax cable to be connected on one side of the box and
the CP ethernet fieldbus communications will be on the other side (coax or
fiber). This will eliminate the requirement or replacing all of the FBM
Isolators (FBIs) with FBI10E modules and it will also enable other migrator
products to communicate with the CP60.
"Bennett, David"
<[EMAIL PROTECTED]> To: "Foxboro DCS Mail
List"
Sent by:
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED] cc:
oject.org> Subject: RE: CP60, old
and new FBM type
08/23/01 07:59 AM
Please respond to "Foxboro
DCS Mail List"
Yes, the legacy FBMs and the new 200 series FBMs can both be ran on the
same CP60. We have been doing this since May. The Fieldbus Isolators
in the legacy FBM rack will have to be changed to FCMs and with SysDef
2.0.1, the legacy FBM ECBs have to be added manually through the ICC, as
SysDef will not allow them to be added to a CP60.
David R. Bennett
Process Control Associate
RFS Ecusta, Inc.
P.O. Box 200
1 Ecusta Road
Pisgah Forest, NC 28768
EMail.... [EMAIL PROTECTED]
> -----Original Message-----
> From: Perrot, Francois [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, August 23, 2001 8:30 AM
> To: Foxboro DCS Mail List
> Subject: CP60, old and new FBM type
>
> Hi list,
>
> does anybody know if I can run both old and new FBM type on the same
> CP60 ?
> (e.g. FBM201 and FBM01)
>
>
>
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
