Hello List,
We are looking at updating our version 4.3 system to version 6.2.1 in order to expand
our system to include the new CP60. We currently use AW/WP51B's with Display Manager
and the Legacy Historian. Our CP's are fault tolerant CP40A's. We have 5 nodes
connected via Carrier Band LAN. We can not shut down all nodes at once, since this
system controls two 600 megawatt coal fired power generators.
Questions?
1. Do all of the nodes need to be converted at one time to 6.2.1 or can some nodes
exist at 4.3 while part of the node is at 6.2.1?
2. Can we continue to use our Display Manager displays, or do we have to change to the
Fox View displays?
3. Can we continue to use the Legacy Historian at version 6.2.1, or do we have to
convert to the AIM historian?
4. Is there a different CP image at version 6.2.1 that requires a reboot of the CP for
this upgrade?
Thanks for any guidance that you can give, as we are looking to see what windows of
opportunity we have for doing this type of upgrade.
Jim Kahlden
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
