Stephen,
     
     To change out the AW you do not have to reboot the CP's to get the 
     correct MAC address to them, but you do have to run a script on the 
     CP's. See HH845 to get the procedure. Also you might need QF 991316 
     for this. It does not register itself in /usr/fox/sp/lastinst/QF_INFO 
     so you have to look for these files :
     
     /opt/fox/bin/tools/ckmacadr
     /opt/fox/bin/tools/ckmacadr.stn
     /opt/fox/bin/tools/get_style
     
     Hope this helps,
     
     Daren Bishop
     ASC Corp.
     [EMAIL PROTECTED]
     
     ______________________________ Reply Separator 
     _________________________________
     Subject: RE: Adding new AW51E to nodebus 
Author:  "Foxboro DCS Mail List" <[EMAIL PROTECTED]> at 
INTERNET-MAIL
Date:    4/2/01 1:54 PM


Hi Norm,
     
  The AW51B I plan to replace does not hold the CSA, but since the MAC
address will change I would want to make sure that the CP's will be able to 
find and boot off the new AW51E.  I do not know if I have to reboot the CPs 
right away or if they could stay on line for a few hours while I made sure 
the AW was working properly.
     
  I should be able to do the load-all prior to connecting the new AW to the
node while I am loading the rest of the software and doing the loadh50 for 
the historian.
     
  Thanks,
     
Stephen Murray
Asarco
     
-----Original Message-----
From: Tessier, Norm [mailto:[EMAIL PROTECTED]] 
Sent: Monday, April 02, 2001 1:46 PM
To: 'Foxboro DCS Mail List'
Subject: RE: Adding new AW51E to nodebus
     
     
Yes, if you are replacing the 'B' box the CPs and Gateways will all have to 
be rebooted.  The 'E' box will have 'Initialized' day0 images for all of the 
hosted CPs and Gateways.  These should have a 'LoadAll' done on an off-line 
test bed done for all of the CPs and Gateways. Do this with a SaveAll made 
after an UpLoad done just before you wish to change out the Host.  If you 
cannot do this, a LoadAll must be performed on the running system for the 
Stations hosted by this 'E' box.  It will require significantly more down 
time to do it on-line.  
     
CSA saves and merges may be required, as well. Especially if the 'B' box you 
are replacing hosts CSA.  If it gets this complicated, you should get 
assistance from Field Service.   
     
Norm Tessier
Regional Lifeline Specialist
District 7
This transmission is for the intended addressee only and is confidential 
information. If you have received this transmission in error, please delete 
it and notify the sender. The contents of this E-mail are the opinion of the 
writer only and are not endorsed by ASARCO Inc. unless expressly stated 
otherwise.
     
----------------------------------------------------------------------- 
This list is neither sponsored nor endorsed by the Foxboro Company. All 
postings from this list are the work of list subscribers and no warranty 
is made or implied as to the accuracy of any information disseminated 
through this medium. By subscribing to this list you agree to hold the 
list sponsor(s) blameless for any and all mishaps which might occur due to 
your application of information received from this mailing list.
     
To be removed from this list, send mail to 
[EMAIL PROTECTED] 
with "unsubscribe foxboro" in the Subject. Or, send any mail to 
[EMAIL PROTECTED]
     
     


-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All 
postings from this list are the work of list subscribers and no warranty 
is made or implied as to the accuracy of any information disseminated 
through this medium. By subscribing to this list you agree to hold the 
list sponsor(s) blameless for any and all mishaps which might occur due to 
your application of information received from this mailing list.

To be removed from this list, send mail to 
[EMAIL PROTECTED] 
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]

Reply via email to